| UNI-1 |
 |
1" Unibit | |
| 1"Unibit (Preferred choice of contractors) Can drill a 1" hole in 4 seconds Perfect hole every time "You will never use a round hole saw again." |
|||
| OTKP |
 |
Otiker Pincher Tool | |
| Used to pinch Otiker clamps tight. | |||
BLO-1/4 BLO-3/8 |
 |
BLO-1/4 Blowgun (1/4" fittings) BLO-3/8 Blowgun (3/8" fittings) High volume 1/4" full flow. Comes with 14" of 1/4" steel tubing. |
|
| WAND | Replacment wand only for BLO and BLOR | ||
BLOR-1/4 BLOR-3/8 |
 |
BLOR-1/4 Blowgun with regulator (1/4" fittings) BLOR-3/8 Blowgun with regulator (3/8" fittings) High volume 1/4" full flow. Comes with 14" of 1/4" steel tubing. Gives a larger blast of air than any other gun. Rated for 300 P.S.I. The dial regulates air flow from 0 - maximum air volume. Great for delicate areas. |
|
| MAG |
 |
Vent Magnet Roll | |
| 60" X 24" Covers vertical vents easily. Can be cut with scissors. |
|||
| 411 |
 |
Otiker Clamps | |
| for 3/8" hose O.D. Used for clamping fittings onto skipperline tubing or air line. |
|||
| 611 |
 |
Otiker Clamps | |
| for 1/2" hose O.D. | |||
| 812 |
 |
Otiker Clamps | |
| for 5/8" hose O.D. | |||
| 819 |
 |
Otiker Clamps | |
| for 3/4" hose O.D. | |||
|
Plastic Plugs (Soft Plastic)
Available in Black or Silver
|
|
|||||||||||||||||||||||||||
Buy any 5 Bags and get a 10% Discount!
DM |
 |
Duct Mask Duct Mask is used to provide a quick temporary seal on registers and grills, especially on walls and ceilings. Duct Mask in an adhesive backed film that comes in 8" wide 200' rolls. Duct Mask is perforated every 4" to provide a quick custom, one-step installation. Duct Mask can be easily removed from the register without harming the register's factory finish (may take off painted surface). |
