|
SKIPPER BALLS |
Heat Seal has become the largest manufacturer of skipper balls in the world. Should you need a special skipper ball for any unique application, do not hesitate to contact us.
| SK-2 | ![]() |
Reverse Blowing Aluminum - 6 jets | 1 - 5 $22.00 |
6 - 14 $18.00 |
15+ $15.00 |
| Excellent for low pressure (less than 150 P.S.I.) Comes with 1/4" hose barb. | |||||
| SK-2P | ![]() |
Reverse Blowing Plastic - 6 jets | 1 - 5 $22.00 |
6 - 14 $18.00 |
15+ $15.00 |
| SK-3 | ![]() |
Reverse Blowing Spinning - 6 Jet | 1 - 5 $45.00 |
6 - 14 $41.00 |
15+ $38.00 |
| Improved design gives more spinning power. Works better in dryer vents than any other ball. Can travel 40' through 5 elbows and beyond. Works best in round duct. Comes with built-in 1/4" hose barb. | |||||
| SK-3LP | Reverse Blowing Spinning - 6 Jet. 100 - 150 PSI working pressure. | 1 - 5 $45.00 |
6 - 14 $41.00 |
15+ $38.00 |
|
| Does not require high pressure to operate. | |||||
| SK-4-6 | ![]() |
Forward Blowing Aluminum - 6 Jet | 1 - 5 $22.00 |
6 - 14 $18.00 |
15+ $15.00 |
| Comes with 1/4" hose barb. Also available in plastic - SK-4P | |||||
| SK-4-12 | ![]() |
Forward Blowing Aluminum - 12 Jet | 1 - 5 $27.00 |
6 - 14 $23.00 |
15+ $20.00 |
| Comes with 1/4" hose barb. Also available in plastic - SK4P | |||||
| SK-5 | ![]() |
Forward Blowing Spinning - 6 large jets | 1 - 5 $45.00 |
6 - 14 $41.00 |
15+ $38.00 |
| Improved design gives more spinning power. Works best in round ducts or dryer vents. Excels in cleaning blocked vents. Comes with built-in 1/4" hose barb. | |||||
| SK-6 | ![]() |
SK-6 Reverse Blowing Aluminum - 12 Jets | 1 - 5 $27.00 |
6 - 14 $23.00 |
15+ $20.00 |
| Comes with 1/4" hose barb. | |||||
| SK-6P | ![]() |
SK6 Reverse Blowing Plastic - 12 Jets | 1 - 5 $27.00 |
6 - 14 $23.00 |
15+ $20.00 |
| Comes with 1/4" hosebarb. | |||||
| SK-6W | ![]() |
The Smart One! Reverse Blowing - 12 Jets | 1 - 5 $27.00 |
6 - 14 $23.00 |
15+ $20.00 |
| More control in all ductwork and dryer vents. 12 jets offset allows you to control the skipper ball more easily. Skipper ball can be run up one side, across the top and down the other side of the duct.
When used with the blue skipper line when applying a twisting motion, you can easily change the direction of the ball causing it to go from side to side in the ductwork. This ball is rapidly becoming our most popular. Comes with 1/4" hose barb. User's comment |
|||||
| SK-7-6 | ![]() |
Reverse Blowing Aluminum - 6 Jet | 1 - 5 $22.00 |
6 - 14 $18.00 |
15+ $15.00 |
| New design. Comes with 1/4" hose barb. 3/4" diameter for those narrow places. | |||||
| SK-7-12 | ![]() |
Reverse Blowing Aluminum - 12 Jet | 1 - 5 $27.00 |
6 - 14 $23.00 |
15+ $20.00 |
| New design. Comes with 1/4" hose barb. 3/4" diameter for those narrow places. | |||||
| SK-8P | ![]() |
Reverse Blowing Plastic - 18 jets | 1 - 5 $49.00 |
6 - 14 $49.00 |
15+ $49.00 |
| Requires 1/2" airline. Travels up to 60 feet with 120 P.S.I. Can be used with tow behind compressor or truck mount compressor. 18 jets, 6 of them on one side causes the ball to sweep from side to side for precise cleaning. | |||||
| SK-9W | ![]() |
The Wild One! Reverse Blowing - 8 Jet |
1 - 5 $25.00 |
6 - 14 $21.00 |
15+ $18.00 |
| Excels when skipper line tubing exceeds 35 feet. Holes off-set to give more control. Comes with 1/4" hose barb. | |||||
|
530 Westney Road South, Unit
#1 |
|
Copyright © 2005 Heat Seal Equipment - Air Duct Cleaning Equipment and Insulation Blowing Machines
Air Duct Cleaning Equipment (U.S. $) | Insulation Blowing Equipment & Machines (U.S. $) |