This Scorpion system is made up of rods and snakes that are hollow and carry high pressure air to the interchangeable agitation devices. These rods have quick disconnects so they can be joined together quickly and allow you to push the agitation device up to 100' in the duct work and everything will go through a 1" hole (except the SSFB). The rods are designed not to come apart inside the duct.
Compressed air causes the tentacles on the predator whips to thrash in every direction at once hitting the duct work and wiping it clean. If there are pieces of heavy debris that will not become airborne you will use either a forward or reverse blowing skipper ball to push or pull the debris to the suction hose.
The Octopus Predator Whip has less "wallop" then the Mini Predator. The Mini Predator Whip has less "wallop" than the Single Predator Whip. The lighter the "wallop" the easier it is to clean fragile ductwork. ie. flexduct or insulated duct. This system cleans rectangular ductwork better than brushes. NOTE: Higher air pressure is more productive and cleans easier.
New improved package. |
 Includes our new rod, an extra whip and 3/8" fittings for better performance. |
COMPLETE SCORPION PACKAGE #1
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCORPION ROD STARTER PACKAGE #2
Consider ordering the SCORPION ROD SYSTEM.
With the advent of our Scorpion Rod System, our customers have been able to take Duct Cleaning to another level.
NOTE: Higher air pressure is more productive and cleans easier.
BENEFITS:
- Reach places you could not clean before.
- Perform a better cleaning job than ever before.
- Clean quicker than you could before.
- Do a great job instantly through a 1" hole.
 Includes an extra whip and 3/8" fittings for better performance. |
|
SCORPION STARTER PACKAGE #2 |
||||
| 3 pcs | SS1A | 5' x 3/8" Medium Flexible Rods | US$90.00 | |
| 2 pcs | SS1B | 5' x 3/8" Stiff Rods | US$ 60.00 | |
| 1 pc | SS16 | Octopus Predator Whip | US$ 48.00 | |
| 1 pc | SS16LP | Octopus Predator Whip (low pressure) | US$ 48.00 | |
| 1 pc | SS15 | Mini Predator Whip | US$ 30.00 | |
| 1 pc | SS3 | Single Predator Whip | US$ 8.25 | |
| 1 pc | SS2H38 | Ball Valve with 5' clear braided tubing & Scorpion Female QD |
US$ 22.95 |
|
| Regular Price | US$307.50 | |||
| Part # STP138 | Discounted Package Price | US$260.00 | ||
SCORPION WHIPS
Included in your Scorpion Package are the following whips. All have quick disconnect fittings so they can be interchanged quickly and easily. Heat Seal is now able to offer the Octopus whip with low pressure tentacles. These will thrash at a much lower pressure down as low as 100 PSI minimum with a recommended starting pressure of at least 150 PSI. NOTE: Higher air pressure is more productive and cleans easier..
| SS16 |
 |
Octopus Predator Whip 14" long | |
|
|||
| SS1628 |
 |
Octopus Predator Whip – 28” long | |
| SS16LP |
 |
Octopus Predator Whip – 14” long | |
| Specifically designed for working under low pressure as low as 100 PSI | |||
| SS1628LP |
 |
Octopus Predator Whip – 28” long | |
| Specifically designed for working under low pressure as low as 100 PSI | |||
| SS15 |
 |
MINI Predator Whip | |
|
|||
| SS8 |
 |
ORIGINAL Predator Whip | |
| 3 1/4" Ball which requires a 4" hole. Excels where you have to travel over 50' in the duct work. Also slides or travels better in flexible duct. | |||
| SS3 |
 |
SINGLE Predator Whip | |
| 12" Whip with male QD Our most aggressive whip for loosening caked on debris |
|||
REPLACEMENT TENTACLES |
|||
| SS16T |
 |
For Octopus Predator Whip -14" Long | |
| For Octopus Predator Whip with brass inserts. (8 per set) | |||
| SS1628T |
 |
For Octopus Predator Whip - 28" Long | |
| SS16TLP |
 |
For Octopus Predator Whip -14" Long | |
|
For Octopus Predator Whip with brass inserts. Specifically designed for working under low pressure, as low as 100-150 PSI. |
|||
| SS1628TLP |
 |
For Octopus Predator Whip - 28" Long | |
|
For Octopus Predator Whip with brass inserts. Specifically designed for working under low pressure, as low as 100-150 PSI. |
|||
| SS15T |
 |
For Mini Predator Whip - 14" Long | |
| For Mini Predator Whip with brass inserts. (3 per set) | |||
| SS15TO | For Mini Predator Whip - Tubing Only - Sold by the foot | ||
| SS8T |
 |
For Original Predator Whip - 14" Long | |
| For Original Predator Whip. (3 per set) | |||
| SS8TO | For Original Predator Whip - Tubing Only - Sold by the foot | ||
| SS3T |
 |
For Single Predator Whip - tubing only | |
| For Single Predator Whip | |||
| SS18T |  |
For Scorpion Brush (3 per set) | |
SCORPION PARTSSTEEL male QD for Heat Seal's Rods and Snakes. This makes the best rods in the business "Better than Ever". Lengthens the life of our rods greatly. Is available as a replacement part. |
|||
| SS1A |
 |
5' X 3/8" Blue Medium Flexible Rods | |
| These rods have a memory. They can be bent in a 90 degree angle and will stay that way. They are flexible enough to tie in an 8" diameter knot. With steel fitting. |
|||
| SS1B |
 |
5' X 3/8" White Stiff Rods | |
| When you bend the ends in a circle so they touch, the rods will
spring back to being straight again (like a bow and arrow) With steel fitting. |
|||
| SS1C |  |
5' X 1/4" White Stiff Rods | |
| When going straight up in a shaft, these rods support their own weight and remain straight. These rods are made of the same material as our stiff rods only 1/4" I.D. instead of 3/8". With steel fitting. |
|||
| Users Comment: "These rods are very flexible." | |||
SS1D |
 |
5' X 5/8" O.D. White Stiff Rods | |
| Our stiffest rods ever made. Excellent for very long runs and great control. | |||
|
|
|||
| SS2 / SS238 |  |
Ball Valve with Scorpion Female QD This tool is used to connect the scorpion rods to the airline. |
|
| SS2T / SS2T38 |  |
Thumb Valve with Scorpion Female QD This tool is used to connect the Scorpion Rods to the air line. Allows you to give short bursts of air at maximum flow. |
|
| SS2H / SS2H38 / SS2HT |
 |
Ball Valve with 5' clear braided tubing and Scorpion Female QD This tool is used to connect the scorpion rods to the airline. |
|
| SSTV / SSTV38 |  |
Thumb Valve with 5' clear braided tubing and Scorpion Female QD This tool is used to connect the Scorpion Rods to the air line. Allows you to give short bursts of air at maximum flow. |
|
| SN20 |
 |
SNAKE - 20' Length (our most popular) |
|
| Has scorpion quick disconnect on ends. Used for smaller ductwork such as cold air returns, supply vents and dryer vents. Made of 1/4" I.D. tubing which is the same plastic as our medium flexible rods (SS1A). Stiff enough to push forward blowing balls down the return but flexible enough to go around elbows. Can connect to the rods. Longer lengths available up to 100'. Add US$4.50 for every extra 5 feet. With steel fitting. |
|||
| SN25 |
 |
SNAKE - 25' Length
With steel fitting. |
|
| SN30 |
 |
SNAKE - 30' Length
With steel fitting. |
|
| SN35 |
 |
SNAKE - 35' Length
With steel fitting. |
|
| SS18 |
 |
Scorpion Spinning Brush Improved design, more torque |
|
Can only be used on Scorpion rods and snake. |
|||
| SS4 |
 |
#4 Forward Blowing Skipper Ball for Scorpion | |
| Used to loosen and push debris away from you, towards the suction hose. Comes with male scorpion QD (SS5). | |||
| SS6 |
 |
#6 Reverse Blowing Skipper Ball for Scorpion | |
| Used to loosen and pull debris towards you and the suction hose. Comes with male scorpion QD (SS5). | |||
| SS9 |
 |
#3 Reverse Blowing Spinning Ball for Scorpion | |
| Excels in small round ductwork especially in dryer vents. Used on the end of the 20' snake, this spinning skipper ball will pull the snake around elbows. Comes with male scorpion QD (SS14). | |||
| SS10 |
 |
#5 Forward Blowing Spinning Ball for Scorpion | |
| Excels in small round ductwork especially in dryer vents. Because the end is alive or moving around all the time it finds its way around elbows much easier than other tools. Comes with male scorpion QD (SS14). | |||
SSFB / SSFB3 |
 |
Flexible Duct 4" Ball Goes between Scorpion rods and scorpion agitation device. Travels over flexible ductwork which does not catch on the ribs. |
|
Purchase any 10 rods and get the 11th one free!
|
SS2A |
 |
1/4" NPT Male Thread x Female QD (Replacement for SS2 and SS2T) |
|
| SS5 |
 |
1/8" NPT Male Thread x Male QD NPT thread fits non-spinning skipper balls. |
|
|
SS7 |
 |
1/4" NPT Female Thread x Male QD Brass Fitting for Original Predator (SS8) and Flexible Duct Ball (SSFB) |
|
| SS17 |
 |
3/8" NPT Male Thread x Male QD Brass Fitting for Octopus Predator (SS16) and Mini Predator (SS15) |
|
| Replacement fittings for 3/8" Scorpion Rod |
|||
|
SS11 |
 |
3/8" Hose Barb x Female QD | |
| SS12 |
 |
3/8" Hose Barb x Male QD | |
| Improved steel fitting | |||
| Replacements fittings for ¼” Rods & Snake Tubing |
|||
|
SS13 |
 |
1/4" Hose Barb x Female QD | |
| SS14 |
 |
1/4" Hose Barb x Male QD Improved steel fitting |
|
